Any one like Lock N Load Bushings?

[Jeff H]

NICE, @Glaciers !

Mine is a bit more humble/less sophisticated. I'm down to five sets of dies and one turret with "misc. dies."

 

[JonB]

I use Lee's round red plastic die boxes for my turret/die storage. Bottom two shelves on the right. I use the same round red boxes for gun cleaning brushes/jags/patch holders, caliber specific, all on 4th shelf.

 

[CWLONGSHOT]

A 30/06 case set into a shelf about 4.5" apart makes me a dandy shelf for set up turret storage. I use a forester bit to make a pocket to hold appropriate shell holder.

I can snap a pic if anyone wants ta see. Works well for me.

CW

 

[Glaciers]

I like pictures

 

[fiver]

aha!!
i'm gonna invent a powered die inserter and a separate remover tool that hooks on to your power drill.
i should make a fortune.
zoop--vroop 50 dollars each,, 5 seconds each direction,, problem solved.

 

[CWLONGSHOT]

I like pictures

 

[Glaciers]

Nicely done CW!
I used a 3” hole saw and a scrap piece of countertop I had used the front 6 inch bull nose for a filler in the cabin kitchen. I have a large selection of hole saws from 3/4 inch to 6”, lots of duplicates and triples as well. But I only have one 3” and it was not sharp. So I ground and smoked my way through 21 holes. Thought about driving to town but not in winter for just one item.
Note to self, get a new 3” hole saw On the next town trip.

 

[Petrol & Powder]

Or spend about an hour with a thin file and sharpen the teeth on the one you have.

Hole saws are neat but even the good ones will dull if you get them just a little too hot.
The Lenox brand are about the best I've found and even those have to be cooled while cutting.

I like a Forstner bit up to about 2" and beyond that, it's sawzall time!

 

[Glaciers]

P&P I lost my file and I’m not going to look for it.
Lenox are good ones. Forstner bits are great.

 

[CWLONGSHOT]

I made a few more modifications.



Here is a video too.

 

[CWLONGSHOT]

W found a seller with a 3D printer on eBay selling brackets to store items in a LnL base!!

Coming soon.