RicinYakima
High Steppes of Eastern Washington
No, but there are a lot of worn out, shot out and rusted out ones.
Figured Out My Flyers
- Thread starter Snakeoil
- Start date
quicksylver
Well-Known Member
A word about shimming 03-03a3 barrelshttps://www.milsurps.com/showthread.php?t=32578
Just a side noteold timmers woud loosen the receiver screws between matches to keep them from crushing the wood, I have shimmed alot of tang screws to bring back the accuracy, frownd on by the DCM
Just a side noteold timmers woud loosen the receiver screws between matches to keep them from crushing the wood, I have shimmed alot of tang screws to bring back the accuracy, frownd on by the DCM
Last edited:
quicksylver
Well-Known Member
a worn out barrel
those who listen with open minds learn, I got the gun for less than half its value cause it wouldn't shoot, notice bullets are sized .312
Interesting Utube about big guns and powder. Guy gets into old powder and deteriaton of same. Expected SD is 5 fps! Degreaded drops to 35 fps. Degredation takes a long time but their powder is stored in proper environment. Interesting, he talks about a poly plastic coating on the powder bags that reduces wear on the barrel.