David Reiss
Active Member
I collect Herters Powermag Revolvers and have (4) .401s & 1 each of a .44 mag & .357 mag. These molds are not in my stable and I am willing to buy or trade.
Wanted Lyman 401452, 40188, & 40395
- Thread starter David Reiss
- Start date
Elric
Well-Known Member
I've seen a few neat-o molds on fleabay, but they don't work very well in a .41 Mag.
Okus-dokus, I'm lookin'.
http://ps-2.kev009.com/ohlandl/Cast_Bullet/41_Experience/41_Caliber_Experience.html
.401 Herter Powermag NOTE: I know these are .401-.403, but they're COOL.
Herter's .401 Powermag by Dick Williams
.401 Herter Powermag by Lee Martin
.401 Herter Powermag Case Forming by Lee Martin
Okus-dokus, I'm lookin'.
http://ps-2.kev009.com/ohlandl/Cast_Bullet/41_Experience/41_Caliber_Experience.html
.401 Herter Powermag NOTE: I know these are .401-.403, but they're COOL.
Herter's .401 Powermag by Dick Williams
.401 Herter Powermag by Lee Martin
.401 Herter Powermag Case Forming by Lee Martin
David Reiss
Active Member
I am not needing molds for the .41 mag. I am very familiar with those articles and several more. As stated I am wanting only the molds listed, I have about 6 various ones now, but want to add those to my collection.
Elric
Well-Known Member
Dave, as I surf for 41 caliber stuff, the 400, 401, and 403 moulds taunt me, they really do. I saw a 403 that looked pretty nice, don't remember the last three digits. No, you can't have any .410/.412 moulds.
If there is a better description of the genesis or use of these bullets, I'd like to know...
http://ps-2.kev009.com/ohlandl/Cast...an_Mold_Descriptions.html#400_caliber_400_dia
40188 A very successful bullet designed by Douglas Sorenson for the .38-40 (PB, 170 - TP is 88)
401452 Designed by Boser for the .38-40. (PB, 196 - TP is 452)
40395. These are good light weight, grooved, short range, .40 caliber bullets. They require special chamber to seat them. Another good .40 caliber short range bullet is No. 40043. (PB, 145, 195 - TP is 95)
If there is a better description of the genesis or use of these bullets, I'd like to know...
http://ps-2.kev009.com/ohlandl/Cast...an_Mold_Descriptions.html#400_caliber_400_dia
40188 A very successful bullet designed by Douglas Sorenson for the .38-40 (PB, 170 - TP is 88)
401452 Designed by Boser for the .38-40. (PB, 196 - TP is 452)
40395. These are good light weight, grooved, short range, .40 caliber bullets. They require special chamber to seat them. Another good .40 caliber short range bullet is No. 40043. (PB, 145, 195 - TP is 95)
Last edited:
David Reiss
Active Member
I got a 40188 in today, but want to add 40090, 401654 & 406342. I have an extra cylinder for one of my Powermags in .38-40 and a Uberti clone in .38-40.