JonB
Halcyon member
Seems like it would be wise to 'experiment' with a small amount of lube first...you may need to adjust ATF amount. Finger lubing (buttering the lube on one at a time,) isn't really all that bad. A couple hints, preheat the bullets and if the new lube mix needs it, preheat that also...both would be about somewhere between 98.6º up to 110º. You'll know the right temp, by the ease of application, and not running/slumping out of the lube groove.SNIP>>>
I am leaning toward's Ian's suggestion of adding ATF to the lube. I'm not running downstairs and doing it immediately because it means having to clean out my lubrisizer, pan lubing or buttering the lube on one at a time, none of which encourage me to proceed.
Lastly, I'm just gonna state the obvious: size first, then finger lube.