ChestnutLouie
Active Member
I have a Ruger SP101 in 32 H&R mag and I have been casting the Lee TL314-90-SWC and tumble lubeing them with 45-45-10, they shoot well with no leading.
(925fps over 2.8grains of 700X) The problem is Lee only offers this mold in a two cavity design so it takes forever to cast even a couple hundred bullets. Lee claims that these will drop ar .314" but mine drop between .313" ~ .3125". My lee AAP press sizing dir sizes them to .3125".
Question: Lee offers the 311-93-1R in a six cavity mold but I feel like that will be too small (fit is king)
Thanks
Francis
ps: I want to shoot this gun ALOT and get good with it and that takes practice at the range, two bullets per drop is a pain.
(925fps over 2.8grains of 700X) The problem is Lee only offers this mold in a two cavity design so it takes forever to cast even a couple hundred bullets. Lee claims that these will drop ar .314" but mine drop between .313" ~ .3125". My lee AAP press sizing dir sizes them to .3125".
Question: Lee offers the 311-93-1R in a six cavity mold but I feel like that will be too small (fit is king)
Thanks
Francis
ps: I want to shoot this gun ALOT and get good with it and that takes practice at the range, two bullets per drop is a pain.