Accurate 45-220-E

Ben

Ben

Moderator
Staff member
With that flat on the end of the bullet ( if it would feed well out of a 1911 ? ? ) , it would be some mean medicine !

Ben
 
gman

gman

Well-Known Member
The nose on the Accurate bullet is a little wider than the NOE 452-230-HP which feeds reliably in my 1911's and is very accurate.
 
9

9.3X62AL

Guest
That #45-220-E looks a whole lot like the "45 BD" bullet design that made the rounds on Cast Boolits 12-15 years ago. I have about 25# of these left from about 40# I cast with a borrowed BD mould, and my castings run well in a Glock 21--a SIG P-220--and a Series 80 Gold Cup NM. Bro-in-law's unmodified Series 70 GC wouldn't run on them at all. OAL was 1.200". Another similar design is the RCBS 45 CM.

The Lee 45-230-TC has been a wonderful bullet for me in 45 ACP. It has been my most-fired 45 ACP bullet since it landed at my house 10+ years ago. Seat with .020" of front drive band exposed, and it feeds in EVERYTHING--even BIL's 70s GC, and unfailingly. Lee's 9mm and 40 S&W TC bullets are identically-seated, and behave in the same fashion.
 
Creeker

Creeker

Well-Known Member
This bullet will be a bulk shooter in a 1911 & my Ruger BH so a couple of 4C or 6C moulds are what I need. Would buy LEE if could get a good one.
 
You must log in or register to reply here.