This one arrived this morning.
The mould cast some very nice bullets.
The " numbers " look good on the nose and drive bands,
my aluminum .015 " thick gas checks fit tight.
I've lubed and sized my first 50 or 60 at .310"
Ben
Sized .310", lubed and rolled in BLL.
These are sitting on wax paper to dry overynight.
The mould cast some very nice bullets.
The " numbers " look good on the nose and drive bands,
my aluminum .015 " thick gas checks fit tight.
I've lubed and sized my first 50 or 60 at .310"
Ben
Sized .310", lubed and rolled in BLL.
These are sitting on wax paper to dry overynight.
Last edited: