Hi
I hope this is the right place to start this tread, I have bought one of a few martini cadets here in Norway chamberet for 32 s&w long by reaming it "short" with a 32 h&r reamer. The barrel is .308bore an 1-10" twist.
The former owner only shot j-words in it so I have to start from scratch.
I have 500ct og h&n 86gr rn .309 and 500ct of missouri bullet co 100gr fn .313. Planing to size these down to both .311 and .309 to test accuracy.
Here in norway we only have easy access to vithavouri powders so i have n310,n320 and n330.
Have only tested the 86gr h&n bullets so far with little success, lots of carbon on the cases. Accuracy was about 2" at 50 yards.
Have just accuired a lyman 115gr mould And a lee 120gr round nose, and hopefully these will better the accuracy.
I will oppdate the tread when i have tested more.
I hope this is the right place to start this tread, I have bought one of a few martini cadets here in Norway chamberet for 32 s&w long by reaming it "short" with a 32 h&r reamer. The barrel is .308bore an 1-10" twist.
The former owner only shot j-words in it so I have to start from scratch.
I have 500ct og h&n 86gr rn .309 and 500ct of missouri bullet co 100gr fn .313. Planing to size these down to both .311 and .309 to test accuracy.
Here in norway we only have easy access to vithavouri powders so i have n310,n320 and n330.
Have only tested the 86gr h&n bullets so far with little success, lots of carbon on the cases. Accuracy was about 2" at 50 yards.
Have just accuired a lyman 115gr mould And a lee 120gr round nose, and hopefully these will better the accuracy.
I will oppdate the tread when i have tested more.