Gary
SE Kansas
While browsing through a precision shooter/reloader website today I came across this thread about full length sizing and the pro's and con's of such maneuver. One fella has a die that ONLY sized the base of the brass and I got to thinking that it might be a good way to go if you use bump dies, ect. Anyhow, the die is a straight bore with a fine polish finish that is made to the specs of a single chamber, as I understand. Supposed to eliminate a sticky bolt after firing.
As can be clearly seen in the photo only the base was touched. Follow that with a bump die and you should be golden. I would then use my Wilson Seating Die to finish the round.
As can be clearly seen in the photo only the base was touched. Follow that with a bump die and you should be golden. I would then use my Wilson Seating Die to finish the round.