waco
Springfield, Oregon
I loaded up 10 test loads to try out hopefully this weekend. R-P full length sized brass, CCI LRP 22gr of SR4759 loaded to 3.200"
The gas check is just below the neck. I hope this is not a problem. This is as far out as I can seat them. You can see in one of the pics where the bullet engages the rifling.
They are sized to .311" lubed with 2500+ and have one coat of BLL on them.
These are my very first 30-06 cast loads. They will be shot out of a Ruger Hawkeye.
I'll post a few pics.
Walter.
The gas check is just below the neck. I hope this is not a problem. This is as far out as I can seat them. You can see in one of the pics where the bullet engages the rifling.
They are sized to .311" lubed with 2500+ and have one coat of BLL on them.
These are my very first 30-06 cast loads. They will be shot out of a Ruger Hawkeye.
I'll post a few pics.
Walter.