Pistolero
Well-Known Member
For those who have trouble. Hammer must be back (raise muzzle, pull trigger) to take the
bolt out., and put it back in.
Hammer must be forward, (lower muzzle, pull trigger) to put the mainspring assy back in place.
Muzzle up at a 45 deg angle to latch mainspring housing in place, to capture the floppy hammer
strut with the mainspring cap.
That is all there is to it. Look up inside with a flashlight, find the mainspring strut, watch it dangle
as you tilt the gun.
Now you are an expert.
Bill
bolt out., and put it back in.
Hammer must be forward, (lower muzzle, pull trigger) to put the mainspring assy back in place.
Muzzle up at a 45 deg angle to latch mainspring housing in place, to capture the floppy hammer
strut with the mainspring cap.
That is all there is to it. Look up inside with a flashlight, find the mainspring strut, watch it dangle
as you tilt the gun.
Now you are an expert.
Bill