Cast with a Lee 6 cavity mould.
Lee 38 / 357 , 148 gr. , T/L wadcutter design .
Run through a Lee " Push thru " sizer to insure that each wadcutter is
uniformly sized to .3575 " .
Rolled in Ben's Liquid Lube.
All of the wadcutters are then ( gently ) poured out
onto 1/4" mesh screen with a small fan blowing on them.
The bullets are dry and ready to load in 1 hour.
Won't get much simpler than this.
Lee 38 / 357 , 148 gr. , T/L wadcutter design .
Run through a Lee " Push thru " sizer to insure that each wadcutter is
uniformly sized to .3575 " .
Rolled in Ben's Liquid Lube.
All of the wadcutters are then ( gently ) poured out
onto 1/4" mesh screen with a small fan blowing on them.
The bullets are dry and ready to load in 1 hour.
Won't get much simpler than this.
Last edited: