waco
Springfield, Oregon
Okay. It feels like amateur hour over here right now. I'm at a loss as to why my Dillon 550B is shaving lead off my 44 bullet bases while I'm seating them.
It's an older RCBS seat die.
I do not have this problem with my Lyman 429421 bullets
This is an Accurate 240gr FNFP
All 44 bullets get sized to .431"
Bullets aged for months(18+bhn)
Seat die is only about half way screwed into the tool head. That's how far I have it backed out.
I'm by no means seating and crimping in the same step.
The case is getting PLENTY on flare on it in station #2 while the powder drops.
I am at a COMPLETE LOSS.
Any ideas?
It's an older RCBS seat die.
I do not have this problem with my Lyman 429421 bullets
This is an Accurate 240gr FNFP
All 44 bullets get sized to .431"
Bullets aged for months(18+bhn)
Seat die is only about half way screwed into the tool head. That's how far I have it backed out.
I'm by no means seating and crimping in the same step.
The case is getting PLENTY on flare on it in station #2 while the powder drops.
I am at a COMPLETE LOSS.
Any ideas?